Jiangsu Baide Special Alloy Co.,Ltd
Tel: +86-523-89558188   E-mail: sunny@jsbdalloy.com
Contact US
Address: Alloy Industrial Park of Shiyan Town Dongtai, Yancheng, Jiangsu
TEL: +86-523-89558188
FAX : +86-523-89555688
Home > Knowledge > Content
Hastelloy C-4
- Jun 04, 2018 -

Hastelloy is an ultra-low carbon alloy composed of Ni, Mo, Cr series nickel bases. Because of its excellent high temperature resistance, oxidation resistance, corrosion resistance, good long-term thermal stability and processability, it is used in harsh industrial environments such as agricultural chemicals, nuclear facilities, and biopharmaceuticals. It also has excellent corrosion resistance, uniform corrosion resistance, and resistance to intergranular corrosion in media of wet oxygen, sulfurous acid, acetic acid, formic acid, and strong oxidized salts. Therefore, it is also widely used in the chemical industry. Hastelloy The electrical conductivity and thermal conductivity are much lower than those of low carbon steel, while the electrical resistivity and expansion ratio are much higher than those of low carbon steel, and the melt pool has low fluidity, poor wettability, and penetrating power.Including nickel molybdenum Hastelloy B-2, nickel chromium molybdenum Hastelloy C-4 and so on.

Hastelloy C-4 is an austenitic low-carbon nickel-molybdenum-chromium alloy. The major difference between Hastelloy C-4 and other early-developed alloys of similar chemical composition is the low carbon, silicon, iron, and tungsten content. This chemical composition gives excellent stability at 650-1040°C, improves resistance to intergranular corrosion, and can avoid edge line corrosion susceptibility and weld heat affected zone corrosion under proper manufacturing conditions.

Material properties

Excellent corrosion resistance for most corrosive media, especially in the reduced state.

Excellent local corrosion resistance in halides.

Application area

It has been widely used in most chemical fields and high temperature environments. Typical application areas:

Flue gas desulfurization system

Pickling and acid regeneration factory

Acetic acid and agrochemical production

Titanium dioxide production (chlorine method)

Electroplating

We are a Chinese factory specializing in manufacturing alloy fasteners for over 10 years. We can supply various fasteners products such as below:

Hastelloy C-4 hex bolts, C-4 stud bolts, C-4 heavy hex nuts,

Hastelloy N06455 hex bolts, N06455 stud bolts,N06455 heavy hex nuts,

Hastelloy 2.4610 hex bolts, 2. 4610 stud bolts,2.4610 heavy hex nuts and so on.


Previous: Hastelloy C22

Next: Hastelloy C-276